CC2500 mini - ( TTL ) 2.4GHZ WIRELESS REPLACEMENT FOR SERIAL
CC2500 RF Module is a Transceiver module which provides easy to use RF communication at 2.4 GHz.
It can be used to transmit and receive data at multiple baud rates from any standard TTL source.
It works in Half Duplex mode i.e. it provides communication in both directions, but only one direction
at same time (not simultaneously). This switching from receiver to transmitter mode is done automatically.
Supports Multiple Baud rates (4800/9600/19200/38400).
Supports Multiple Channel Selection (CH0/CH1/CH2/CH3).
Works on ISM band (2.4 GHz) which is reserved internationally so no need to apply for license.
No external Antenna required.
Plug and play device.
Works on 5-9V DC supply.
Standard UART Interface.
DIP switch 1 & 2 are used to set the Baud rate .
DIP switch 3 & 4 are used to select Channel frequency.
SWITCH POSITION slide switch towards ON position for 1 & down position for 0
Switch 1 Switch 2 BAUD RATE
0 0 9600 bps
0 1 19200 bps
1 0 38400 bps
1 1 4800 bps
Switch 3 Switch 4 Channel
0 0 0
0 1 1
1 0 2
1 1 3
DEFAULT is all 0 -- > Baud 9600 at Channel 0
Settings effective only after Power Off & On. While power On ,settings are not effective.