NET
Go to content

E PAPER DISPLAY MODULE 2.9 Inch

DISPLAYS > OLED NEXTION EPAPER MAX7219
Wave Share
E INK Display
Rs1,550.00(GST excl.)
Add

E PAPER DISPLAY MODULE 2.9 Inch WaveShare

with SPI Interface Board








Model SKU 12956  Resolution 296x128, SPI interface

This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller,
communicating via SPI interface, support partial refresh.

⚫ Due to the advantages like ultra-low power consumption, wide viewing angle,clear display without electricity,
it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

⚫ We provide demo codes for you (Arduino, Raspberry Pi and STM32)

SPECIFICATION

⚫ Operating Voltage: 3.3V/5V  - The voltage of every pins should be same 3.3V or 5V

⚫ Working Temperature: 0~50°C

⚫ Interface: 3-wire SPI/4-wire SPI
Dimension:
◼ PCB: 89.5mm × 38mm
◼ Raw Panel: 79.0mm × 36.7mm
⚫ Display area: 66.89mm × 29.05mm
⚫ Dot pitch: 0.138 × 0.138

⚫ Resolution: 296 × 128
⚫ Display color: Black, White

Refresh time

◼ Partial refresh: ≈0.3s      Full refresh: 2s

Consumption

◼ Refresh consumption: 26.4mW(typ.)
◼ Standby consumption: <0.017mW

⚫ Viewing angle: >170°

INTERFACES

VCC :3.3V/5V
GND :GND
DIN :SPI MOSI pin
CLK :SPI SCK pin
CS :SPI chip selection, low active
DC :Data/Command Selection(High: Data; Low: Command)
RST :Reset(Low active)
BUSY :Busy(High active)










DataSheet Download

User Manual

Demo Code Arduino,STM32,Raspberry pi


Support Files Zip

Back to content