ROBOTIC ARM - PIC,8051,AVR ,USB PROGRAMMER,DEVELOPMENT BOARDS - alselectro

Search
Go to content

Main menu:

ROBOTIC ARM

2ND Generation  Robot Arm trainer with 100g lifting capacity!
• Wired control of gripper, wrist, elbow, base rotation and gripper LED
• Quick to assemble and requires no soldering

You need to assemble the Edge Robotic Arm Kit. No soldering is required, but you will need to be able to follow directions carefully. Assembly time is about 2 hours.


     


  
Five axes of robotic movement are at your command with the wired remote. Command the gripper to open and close, wrist motion of 120 degrees, an extensive elbow range of 300 degrees, base rotation of 270 degrees, base motion of 180 degrees, vertical reach of 15 inches, horizontal reach of 12.6 inches, and lifting capacity of 100g. An LED spotlight on the gripper illuminates your work.

Product Features

  •    Build your own fully functional Robot Arm

  •    Features 5 motors with 5 axes of movement

  •    LED Spotlight on gripper illuminates your work

  •    Wired remote controls all arm functions

  •    Assembly Required (About 2 hours. No Soldering Needed)

  •    Lifting capacity of 100g

  •    Uses 4 x D Batteries (not included)

  •    Command the gripper to open and close, wrist motion of 120 degrees, an extensive elbow range of 300 degrees, base rotation of 270 degrees, base motion of 180 degrees, vertical reach of 15 inches, horizontal reach    of 12.6 inches, and lifting capacity of 100g.

  • Some of the added features include a search light design on the gripper and a safety gear audible

  • Indicator is included on all five gear boxes to prevent any potential damage or gear breakage during operation. Total command and visual manipulation using the five switch wired controller, five motors, and five joints.



VIDEO LINK

 
Back to content | Back to main menu