2.4 Inch TFT LCD Touch Display Shield For Arduino UNO

2.4 Inch TFT LCD Shield Touch Display Shield For Arduino UNO

WITH SD CARD SLOT

Features:

2.4 inch LCD TFT display
Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control.
Colorful, 18-bit 262,000 different shades

4-wire resistive touchscreen
240 x 320 resolution

Spfd5408 controller with built in video RAM buffer
8 bit digital interface, plus 4 control lines
Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the micro SD
5V compatible, use with 3.3V or 5V logic
Size: 71 x 52 x 7mm


Pin map of Arduino 2.4” TFT Touch Shield:

ARDUINO PIN             TFT
   
Digital D0 to D7   --->  DB8 to DB15
D8                                  Touch_Dout
D9                                  Touch_IRQ
D10                 SD_CS
D11                  SD_MOSI
D12                 SD_MISO
D13                 SD_SCK
A0                             Touch_Din
A1                             Touch_CLK
A2 -                 not connected
A3                            TFT_CS
A4                           TFT_WR
A5                           TFT_RS


LCD LIBRARY DOWNLOAD


TUTORIAL LINK