RF 433MHz 5Way control
RF 433MHz 5WAY CONTROL
5 Way control using RF 433MHz Transmitter / Receiver , built on TX-2 , RX-2 ICs.
Supply volt maximum 5 v
For Receiver it is recommended to use a series 1N 4007 Diode at the power supply pin 5v.
As long as the particular key is pressed in Transmitter , the corresponding pin at Receiver goes High.It remains high as long as the key is pressed.
For e.g if FWD key is pressed in Transmitter , the corresponding FWD pin at Receiver goes High. It remains high as long as the FWD key is pressed.
Motors can be easily controlled using this control board.